Creating views in model space

Free preview lesson from the course All about printing and plotting in AutoCAD.

What this lesson covers

In this video I will tell you about converting your 3D drawing into 2D views in the model space and for doing that I will use a tool which is called Flat Shot. So here we have our 3D model which we have been using so far and right now we have this drawing in the model space. So here we have this drawing in model space and you can also see that the view cube is in the default position. The top position or the top plane is pointing upwards which is this plane and the rest of the planes are also in their default position. Now to start using the Flat Shot tool we need to first ensure that we are in this top plane. So click on the top plane and this is the plane on which all of our 2D geometries will be made irrespective of the view which we select. So right now we have selected this top view and the 2D view which will be generated will be off top view. So to start the Flat Shot tool you can go to this section panel, expand it and select Flat Shot or you can use its command Flat Shot. So I will use its command and press enter. So here we have this Flat Shot window. Now here we have couple of options that we need to select. So I will start with the destination. So I will select the first option, insert as a new block because we want to convert this geometry into 2D obviously but we also want to keep that geometry as a block and we don't want to replace any existing block so I will select this option. Also we don't want to export it as a file so obviously this will not be selected so that's the first option which we want. Now for the foreground lines we will select by block as the color so whatever the block color is assigned that will be the color of this 2D drawing and also the default line type will be selected. The obscured lines or the hidden lines will also have their color according to the block and the line type will be continuous or the default line type. Now if you decide not to show the obscured or the hidden lines then you can simply uncheck this option. So this will ensure that the hidden lines or the lines which are not in your front view will no longer remain visible but for this case I'll select the show option. Now with these settings simply click on create and there we have it. We have the top view in 2D. Click here and now look at the command line. So it will prompt you to specify the X scale factor. So press enter and that will enter the default X scale factor. Now it will prompt you for the Y scale factor. I'll simply press enter and that will use the X scale factor which is 1 and the rotation angle which is 0 and I'll select that value. So I'll press enter once again. So in this case I pressed enter three times to get this view. So you can clearly see that we have the top view here in this 2D drawing and we also have these hidden lines visible. Now in a similar way we can rotate our view cube and generate remaining views but remember all of those views will be created on this top plane. So you'll know in a moment what I am saying here. So now I'll move this view cube and I'll go to this front view. Once again repeat the flat shot tool but this time I'll use this panel. So select flat shot and I'll keep this option. I'll also select the same option for foreground lines and for obscured lines also I'll select the same option click on create. And now here you'll see a single line but actually it's not a single line. You'll see it in a moment. Click on any point I'll select this reference and now press enter thrice to use the default values. There we have it. Now let's rotate the view cube once again and now we have the left view. So go to flat shot with the default options create and the same plane. Approximately the same plane press enter thrice. Alright so we have the three views. Now let's return back to the top plane and there we have it. We have all the three views which we have created. So this is the view which we created initially and that's quite visible. Also we have the front view which is also visible here and the left view. So all of these views are clearly created on the top plane. Now we have some extra options on the flat shot options window and we'll have a look at that as well. So in this case you can see that we have this front view. We have the obscured lines and we also have some missing lines which we'll try to bring in this view. For that I'll once again go to this front view using this view cube and I'll select the flat shot tool. And here I'll make sure that this obscured lines is selected but in this case I'll simply change the color of the obscured lines so that you can clearly identify obscured lines. Also I'll make sure that include tangential edges is selected. Now if you want to change the line type of the obscured line you can change it to hidden or you can load any other line type. In this case I'll select hidden. Now click on create and I'll place it somewhere over here. Press enter thrice and let's get back to the top view. Now we have some changes here. So you can clearly see that the hidden line which is this line these two parallel lines is now shown in yellow color and we have also changed the line type. But in this case we are not able to see the changed line type just because the scale is not properly set. So you can use LT scale system variable and you can change the overall scale of this drawing. So right now the scale is set to one. Let's change it to 0.02. In your case this value can be anything. So simply I'm pressing 0.02 and here's the changed scale. You can change this scale even further if you want this line to be closely spaced. Now if you look closely you'll also find that we have these two extra lines. So these are the tangential edges and you'll be able to see these tangential edges quite clearly in this drawing. So you can clearly see that we have this fillet here and this fillet is tangent at this point and at this point. So basically we have this line as well as this line.

  • All about printing and plotting in AutoCAD